smartbusa
07-10-2013, 05:50 PM
Good Evening All,
A new member here so go easy on me :welcoming:
Myself and Ex-Engineer Dad are interested in purchasing a CNC Mill (Coverted Manual Mill etc). We have up to £2000 to spend so have looked at converting ourselves but ideally would like to purchase a pre-converted mill.
We'll be milling mainly 4mm mild steel, I've attached an example item that we traditionally get laser cut but need the lead time a lot lower hence the purchase reason.
10385
So if you can assist or provide I thank you in advance.
David
A new member here so go easy on me :welcoming:
Myself and Ex-Engineer Dad are interested in purchasing a CNC Mill (Coverted Manual Mill etc). We have up to £2000 to spend so have looked at converting ourselves but ideally would like to purchase a pre-converted mill.
We'll be milling mainly 4mm mild steel, I've attached an example item that we traditionally get laser cut but need the lead time a lot lower hence the purchase reason.
10385
So if you can assist or provide I thank you in advance.
David