JordanMoseley95
05-12-2013, 06:39 PM
Hello everybody,
My name is Jordan Moseley and currently my CNC knowledge is minimal, I have never operated one but I want to gain the skills to be able to.
I work for an Automotive company that produces parts for many very large motor vehicle companies.
Recently, our company has invested in CNC Machines, the particular one uses Sinumeric 828D, thus I have found resources for that:
Turning
https://www.automation.siemens.com/doconweb/pdf/SINUMERIK_SINAMICS_03_2013_E/828D_SD.pdf?p=1
SinuTrain Turning made easy with ShopTurn
http://www.automation.siemens.com/doconweb/pdf/SINUMERIK_SINAMICS_02_2012_E/TUST.pdf?p=1
But, are there any other resources that I should read first.
Whenever I am sufficiently trained, I will be supervised by a trained operator for safety.
I do have an Engineering Diploma that I earned during my GCSEs, so I have some experience, even if little.
Thanks to all, good to be here.
Jordan
My name is Jordan Moseley and currently my CNC knowledge is minimal, I have never operated one but I want to gain the skills to be able to.
I work for an Automotive company that produces parts for many very large motor vehicle companies.
Recently, our company has invested in CNC Machines, the particular one uses Sinumeric 828D, thus I have found resources for that:
Turning
https://www.automation.siemens.com/doconweb/pdf/SINUMERIK_SINAMICS_03_2013_E/828D_SD.pdf?p=1
SinuTrain Turning made easy with ShopTurn
http://www.automation.siemens.com/doconweb/pdf/SINUMERIK_SINAMICS_02_2012_E/TUST.pdf?p=1
But, are there any other resources that I should read first.
Whenever I am sufficiently trained, I will be supervised by a trained operator for safety.
I do have an Engineering Diploma that I earned during my GCSEs, so I have some experience, even if little.
Thanks to all, good to be here.
Jordan