PDA

View Full Version : New CNC, Anyone know anything about the kew1212



petesos
22-12-2013, 10:53 PM
Hi All
Business has been good and I have just purchased a new cnc (well new to me ) Any one seen the cnc on ebay classified an Orange one a Kew 1212
with 4th axis.
Anyone know anything about the kew1212 I would love to hear anything good or bad.
Pete

m_c
22-12-2013, 11:32 PM
Have you got a link?

petesos
22-12-2013, 11:55 PM
Have only got the item number
eBay item number:

151173055161
Pete

m_c
23-12-2013, 01:12 AM
CNC Router 3kw Spindle 1200* x 1300* x 200 Work Area- Complete! Vacuum Bed! | eBay (http://www.ebay.co.uk/itm/CNC-Router-3kw-Spindle-1200-x-1300-x-200-Work-Area-Complete-Vacuum-Bed-/151173055161?pt=UK_BOI_Building_Materials_Supplies _Carpentry_Woodwork_ET&hash=item23329dc2b9)

GEOFFREY
23-12-2013, 10:52 AM
I don't know anything about those machines, but it does look like you Santa has been good to you!!! merry Christmas to all forum members. G.

Boyan Silyavski
23-12-2013, 02:31 PM
It looks nice. When you have the machine open the control panel and see if you have driver for each axis or there is something funny like 2 motors on one driver. Which is typical for Chinese machines. If so, buy one more motor driver and you should be ok.

petesos
23-12-2013, 08:13 PM
Hi Bud
I will look for that when I get it and order one up , when the cnc is up and running then I need to up date my Laser.
Pete

EddyCurrent
23-12-2013, 09:36 PM
I've seen the same one on there before, maybe not the exact one but one similar and the photos were the same too.
I'll be interested to hear when you have actually got it.

EddyCurrent
29-12-2013, 09:16 PM
Pete, Have you got this in your possession yet ?

petesos
30-12-2013, 01:25 AM
Hi Bud Going to collect it on Tuesday.
why what do you know bud
Pete

EddyCurrent
08-01-2014, 09:27 PM
Hi Bud Going to collect it on Tuesday.
why what do you know bud
Pete

Just interested because I was watching one like it myself, how's it performing ?

petesos
08-01-2014, 11:37 PM
Hi Bud
Well I have it but its not installed yet as I need to move it into my workshop But I have run it up for a while and seen it working
and I am very very impressed not at all like the Strike machine in any way ,,,,every thing about the machine is substantial.
The frame is 10mm welded steel and not one bit of movement and ridgid as hell the Gantry is 14mm cast iron with webbing and the table is a vac bed with 4 seperate zones so you can do a small job or a full size job that covers the whole bed and the 4th axis will take a job piece up to a meter long and 150mm square and even that is 1 inch aluminium .
I am evil though as I lost a lot of money on the Strike machine and I thought to myself Pete you were such a nob end in buying the strike crap
If you find yourself in my area bud you would be made most welcome to come and have a play with the machine and see what you think.
Pete

EddyCurrent
08-01-2014, 11:44 PM
Pete, sounds like it might be a good buy, thanks for the update and invite.

GEOFFREY
08-01-2014, 11:52 PM
Sounds very impressive and good value. G.

petesos
09-01-2014, 12:18 AM
I will post some photos of the machine when its up and running
Pete

navins
12-03-2014, 06:32 AM
Its good to see that model.
But I like to give one suggestion. Its good to buy new one but if you don't have any idea about this model then 1st you have to do experiment on second hand model, then go for new one.
Thank you.

BilboBaggins
05-04-2014, 11:15 PM
I've seen the same one on there before, maybe not the exact one but one similar and the photos were the same too.
I'll be interested to hear when you have actually got it.

I think there is more than one available having seen it before... Perhaps ex-demo?

Dave_GreenBae
22-07-2020, 02:25 PM
Hi Pete,
I've seen a KEW 1325 CNC router on Ebay. Are the KEW machines any good? What's the support like? Have you had any problems with it?

Best Regards

Dave