humbo3d
06-02-2014, 05:42 PM
Hi
When i press start on my vfd the spindle starts to spin for a second or so them stops with an error code = DL.
can't find out where the problem is, it has been working fine for months.
Any ideas would be great
Thanks Tony
P.S it's a 1.5kw with 800w spindle.
When i press start on my vfd the spindle starts to spin for a second or so them stops with an error code = DL.
can't find out where the problem is, it has been working fine for months.
Any ideas would be great
Thanks Tony
P.S it's a 1.5kw with 800w spindle.