lateAtNight
29-04-2009, 11:39 AM
This is driving me nuts. Last night I started wiring up my PSUs, drivers, and motors. All the standard Zapp/MCP kind. Wired everything up as per the diagram provided by MCP. Plugged it in and the PSU has a green light, but the drive has a red one! I have checked my wiring against the note about a hundred times! I tried both series and parallel, tried different drives, different psu. Nothing works!
This is the wiring I am using:
A+: Blue + Red
A-: Blue/white + red/white
B+: Green + Black
B-: Black/white + green/white
Could someone please check the attached pic and tell me what I have done wrong? I have wired these things up before without problem.
Cheers,
Dave.
This is the wiring I am using:
A+: Blue + Red
A-: Blue/white + red/white
B+: Green + Black
B-: Black/white + green/white
Could someone please check the attached pic and tell me what I have done wrong? I have wired these things up before without problem.
Cheers,
Dave.