View Full Version : NEW MEMBER: hello from essex
T0rnado69
17-03-2014, 03:43 AM
hi there new here.
was recommended this site by a fellow member on mig welding forum.
i for a long time have been thinking over making a small cnc table.
done lots of google searching and reading..
its going to be a fun project.
navins
18-03-2014, 10:48 AM
hey...
reply me if you need there any help from me.
If possible I will help you.
tc
irving2008
19-03-2014, 07:23 AM
hi there new here.
was recommended this site by a fellow member on mig welding forum.
i for a long time have been thinking over making a small cnc table.
done lots of google searching and reading..
its going to be a fun project.
Welcome to the forum, we're a friendly lot here (mostly :) ). As always the advice is read lots, especially the build logs, understand your needs, get a design together for review and don't be tempted to buy anything til you need it.
T0rnado69
20-03-2014, 12:13 AM
thank you for the welcome...
i guess it would proberly be best i open a thread in the correct forum area for this.....
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.