Deuce_Coupe
04-06-2014, 01:50 PM
Very good condition, this router has had very little use since it was acquired in June 2013, Must go due to change of plans. Cost over £14,000 when new.
Specifications:
1000 x 1300mm working area.
25mm aluminium bed with tapped hole grid.
175mm Z axis clearance.
Includes hiwin/THK precision ballscrew drive,
20mm hiwin/THK rails, steel gantry
2.2Kw, 24k RPM water-cooled spindle.
+ Spare Spindle (unused).
+ Spare Inverter (unused).
Handheld axis control.
Flood coolant system.
Coolant pump, tube and nozzle, reservoir, raised perimeter coolant side guards.
http://www.exelcnc.com/
Can be seen working by arrangement.
£8000 (o.n.o.) + VAT
http:///itm/261497243575?ssPageName=STRK:MESELX:IT&_trksid=p39 84.m1555.l2649 (http://www.ebay.co.uk/itm/261497243575?ssPageName=STRK:MESELX:IT&_trksid=p39 84.m1555.l2649)
12527125251252612528
Specifications:
1000 x 1300mm working area.
25mm aluminium bed with tapped hole grid.
175mm Z axis clearance.
Includes hiwin/THK precision ballscrew drive,
20mm hiwin/THK rails, steel gantry
2.2Kw, 24k RPM water-cooled spindle.
+ Spare Spindle (unused).
+ Spare Inverter (unused).
Handheld axis control.
Flood coolant system.
Coolant pump, tube and nozzle, reservoir, raised perimeter coolant side guards.
http://www.exelcnc.com/
Can be seen working by arrangement.
£8000 (o.n.o.) + VAT
http:///itm/261497243575?ssPageName=STRK:MESELX:IT&_trksid=p39 84.m1555.l2649 (http://www.ebay.co.uk/itm/261497243575?ssPageName=STRK:MESELX:IT&_trksid=p39 84.m1555.l2649)
12527125251252612528