View Full Version : OneCNC - The Mobile Phone

18-05-2009, 06:06 PM
Hi All
Here is a picture of a model phone customer wanted to make using 3D Milling on a thermwood router
this is the model file they needed to produce
the difference being this needed to be 7 foot tall
this was there first attempt at 3D Milling using OneCNC

18-05-2009, 06:11 PM
here are some pictures of it being roughed out on the machine

18-05-2009, 06:13 PM
heres another shot

18-05-2009, 06:15 PM
and another shot aswell

18-05-2009, 06:19 PM
and another including yours truly (gilly) it was the customers training day

18-05-2009, 06:22 PM
from these routed models we made fibreglass moulds here is the front detail

18-05-2009, 06:24 PM
here is the back detail

18-05-2009, 06:26 PM
this is the picture of the handheld model

18-05-2009, 06:30 PM
here is the finished item with a 42" plasma fitted to the phone which was used as a publicity stand for promoteing the phone, must thank set staging for allowing us to show the picture's hope you enjoyed?
best regards

John S
18-05-2009, 07:56 PM
Ugly Bastitch............................

John S.

PS I miss those big old anologue mobile phones, I had a 444 it was brilliant, no one would mug you when you carried one of those.

You could even jam it under the axle when you were changing a wheel on the Donald.