lateAtNight
11-11-2014, 04:20 PM
Hi everyone,
Got a whole bunch of stuff from my old router project that I dismantled some time ago and now want to sell on the parts otherwise they will just hang around forever!
PS407 42v power supplies x 2
MSD542 Stepper drivers x 4
Hiwin profile rail 15mm with HGH15CAC x 2 carriages on each rail. 500mm in length. Two lengths. (EDIT: SOLD)
20mm profile rail, brand unknown (maybe Thompson? EDIT: Actually "ABBA" rail whoever that is... bought from Merchant Dise / worldofcnc.com if I remember correctly) 2 carriages on each, 520mm length. Two of each.
Ballscrews 600mm total length 520mm thread length, 16mm diameter, single nut
Fixed and floating ends. (EDIT: ONE REMAINING)
Kress 800 FME router with 1/8”, 2, 3, 6, 8 mm collets each with their own nut.
Coolermaster ATCS aluminium case. Can take a Extended ATX motherboard all the way down to Mini ITX which is what I had in there with the stepper drivers and all the other components. 5 cd drive bays, 2 hard drive and 1 floppy drive bay. PSU not included. Motherboard tray slides out but please note that I have drilled some extra holes into this to accommodate the stepper drivers etc.
DIYCNC Optoport parallel breakout board. Version 1.3 according to the manual (included of course). Has 2 relays onboard. Hardly ever used as I upgraded to galil system not long after I bought it.
Custom built Z Axis, double nut ballscrew of brand unknown. Rail and carriages are NSK. Stepper mount included.
I doubt anyone will be interested but I have various lengths of 40 x 40 aluminium extrusion with 8mm slots.
If anyone is interested in these items please let me know. Open to reasonable offers ( say around half of the current RRP?) Plus cost of actual postage on top. Further pictures on request.
Thanks,
David.
Got a whole bunch of stuff from my old router project that I dismantled some time ago and now want to sell on the parts otherwise they will just hang around forever!
PS407 42v power supplies x 2
MSD542 Stepper drivers x 4
Hiwin profile rail 15mm with HGH15CAC x 2 carriages on each rail. 500mm in length. Two lengths. (EDIT: SOLD)
20mm profile rail, brand unknown (maybe Thompson? EDIT: Actually "ABBA" rail whoever that is... bought from Merchant Dise / worldofcnc.com if I remember correctly) 2 carriages on each, 520mm length. Two of each.
Ballscrews 600mm total length 520mm thread length, 16mm diameter, single nut
Fixed and floating ends. (EDIT: ONE REMAINING)
Kress 800 FME router with 1/8”, 2, 3, 6, 8 mm collets each with their own nut.
Coolermaster ATCS aluminium case. Can take a Extended ATX motherboard all the way down to Mini ITX which is what I had in there with the stepper drivers and all the other components. 5 cd drive bays, 2 hard drive and 1 floppy drive bay. PSU not included. Motherboard tray slides out but please note that I have drilled some extra holes into this to accommodate the stepper drivers etc.
DIYCNC Optoport parallel breakout board. Version 1.3 according to the manual (included of course). Has 2 relays onboard. Hardly ever used as I upgraded to galil system not long after I bought it.
Custom built Z Axis, double nut ballscrew of brand unknown. Rail and carriages are NSK. Stepper mount included.
I doubt anyone will be interested but I have various lengths of 40 x 40 aluminium extrusion with 8mm slots.
If anyone is interested in these items please let me know. Open to reasonable offers ( say around half of the current RRP?) Plus cost of actual postage on top. Further pictures on request.
Thanks,
David.