View Full Version : WANTED: Looking for tailstock backplate
cropwell
30-05-2015, 10:30 AM
http://www.mycncuk.com/attachment.php?attachmentid=15439&stc=1Can anyone point me to a UK supplier of one of these (MT3 version) ? ArcEuro do the MT2 one for £28, but the only vendor of the one I want is Carbide and Diamond Tooling in USA and they want over $200 not including shipping. I already have the 80mm 3jaw SC chuck.
Cheers Y'All.
Rob
irgonomics
30-05-2015, 11:23 AM
Hi Rob,
If you cannot find what you are looking for could you use a morse taper adaptor? http://www.arceurotrade.co.uk/Catalogue/Adaptors-Sleeves
Ian.
cropwell
30-05-2015, 02:19 PM
I may also have to make an adapter plate for the 80mm chuck I have. I will have to take the chuck down to Arc, they are only 15 miles from me. I already have the MT2 - MT3 adapter.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.