Chaz
08-06-2015, 08:43 PM
Hi,
Looking at something decent. Dont mind anything old that might need some work like a retrofit.
Denford or similar like a Triac / VMC.
Ideally has an Auto Tool Changer. Must be capable of milling brass / alu at reasonable speeds.
Based in Ickenham, West London.
Let me know what you have.
Thanks
Looking at something decent. Dont mind anything old that might need some work like a retrofit.
Denford or similar like a Triac / VMC.
Ideally has an Auto Tool Changer. Must be capable of milling brass / alu at reasonable speeds.
Based in Ickenham, West London.
Let me know what you have.
Thanks