spyrius
23-08-2015, 10:45 PM
Please provide me with a quote for 10pcs in either POM (delrin plastic) material or aluminium.
files for download are here (including DWG, images and 3d model). All sizes in milimeteres :
http://www.wetransfer.com/downloads/60a1d2d29f695588751832d6a9313cde20150823210223/6188b9
tolerances +- 0.5mm, this is not precision part, this will be used as axle bobbin for motorcycle. The hole in the middle needs to be at minimum 8mm, can be up to 9mm. The chamfers are 3mm diameter and 5mm diameter, please see drawings.
Please get back to me as soon as possible with a quote including cheapest shipping to UK.
thank you, Roman.
[email protected]
files for download are here (including DWG, images and 3d model). All sizes in milimeteres :
http://www.wetransfer.com/downloads/60a1d2d29f695588751832d6a9313cde20150823210223/6188b9
tolerances +- 0.5mm, this is not precision part, this will be used as axle bobbin for motorcycle. The hole in the middle needs to be at minimum 8mm, can be up to 9mm. The chamfers are 3mm diameter and 5mm diameter, please see drawings.
Please get back to me as soon as possible with a quote including cheapest shipping to UK.
thank you, Roman.
[email protected]