Soren DK
25-08-2015, 07:26 AM
I have been working on my project for some time but have just now gotten around to write about it.
My machine is the SIEG Super X2P HiTorque Mill from Arceurotrade.co.uk
The ball screws I’m using are from Isel and the 16 mm version, this was mainly because of the very limit space under the X and Y axis.
My controle is the Eding CNC CPU5A4 Starter 4 axes in combination with a Triple Beast from benezan-electronics.de and one DM556 Leadshine Digital 18-50VDC 0,5 - 5,6A.
http://www.mycncuk.com/attachment.php?attachmentid=15944&stc=1
My machine is the SIEG Super X2P HiTorque Mill from Arceurotrade.co.uk
The ball screws I’m using are from Isel and the 16 mm version, this was mainly because of the very limit space under the X and Y axis.
My controle is the Eding CNC CPU5A4 Starter 4 axes in combination with a Triple Beast from benezan-electronics.de and one DM556 Leadshine Digital 18-50VDC 0,5 - 5,6A.
http://www.mycncuk.com/attachment.php?attachmentid=15944&stc=1