smartbusa
22-12-2015, 01:44 PM
Hello All,
Whilst I convert my AMA30 to Belt drive i've been looking at spindle options over the classic Chinese spindle. I've come across a company who's producing the following options for a Brushless DC Motor and Controller.
1100W 3600rpm
1100W 6000rpm
2200W 3600rpm
2200W 6000rpm
I'm more interested in the 2.2KW version so I've attached the manual and listed the essentials.
Power (W)
Speed (RPM)
Shaft
Pole
Torque (N.M)
2200
3600
42
8
6.1
2200
6000
42
4
3.5
0-5v or 0-10v input for speed control.
Has anyone used something similar? I mainly mill mild steel and aluminium.
David
Whilst I convert my AMA30 to Belt drive i've been looking at spindle options over the classic Chinese spindle. I've come across a company who's producing the following options for a Brushless DC Motor and Controller.
1100W 3600rpm
1100W 6000rpm
2200W 3600rpm
2200W 6000rpm
I'm more interested in the 2.2KW version so I've attached the manual and listed the essentials.
Power (W)
Speed (RPM)
Shaft
Pole
Torque (N.M)
2200
3600
42
8
6.1
2200
6000
42
4
3.5
0-5v or 0-10v input for speed control.
Has anyone used something similar? I mainly mill mild steel and aluminium.
David