PDA

View Full Version : Touch probe and MT3 tooling



komatias
30-01-2016, 02:57 PM
Hi all,

I have a number of items that I have been hoarding for too long so they best find use in someone else's garage/workshop.

First off is a pair of as new touch off tools/probes that I bought in 2013 from Arnie on the Machsupport forum. They cost $135 each approximately £80 in todays' money. Each probe comes with the hardware to convert it to and from a touch off plate. So I have one of each. Never really got round to centring them and using them due to other projects. Now with the TTS type holders I have and the Haimer probe I cannot see using them at all.

Happy to see them go to the first person to offer me £60 each including postage.

https://lh3.googleusercontent.com/-Xrt_3HymV3E/Vqy7laMysxI/AAAAAAAAId0/4yVUaTC7ONM/s640-Ic42/IMG_20160130_132209.jpghttps://lh3.googleusercontent.com/-D4wzjSLmSU0/Vqy7qbSKhAI/AAAAAAAAId8/TeHnalocg68/s640-Ic42/IMG_20160130_132145.jpghttps://lh3.googleusercontent.com/-TJHaxlC8ehA/Vqy7uJMjQrI/AAAAAAAAIeE/NiT7H_on3OA/s640-Ic42/IMG_20160130_132135.jpg

Second set is a collection of MT3 tooling. Again redundant at this point in time.

11 piece Collet set metric , as new, never used with UNF threads for drawbar. I have two lengths of the required UNF thread bar to go with them. Bought from RGDtools in 2012 I think. These are heavy so will go out with My hermes or similar. £30 plus postage sound reasonable?

https://lh3.googleusercontent.com/-72V7xqTRtPM/VWoP7bVOa3I/AAAAAAAAIVo/xTYPON2pI4s/s640-Ic42/DSC_0514.JPG

22mm face mill shell arbour from Chronos MT3 and metric thread: This bugger was pretty dear if I remember correctly. Used it maybe 4 times with a shell mill. £12 including postage


https://lh3.googleusercontent.com/-oiWBa8lQe4c/VWoQJPR5wnI/AAAAAAAAIWU/6ubUwkNdVqU/s640-Ic42/DSC_0519.JPG

Finally, a bunch of other tooling:
Boring head (£10)
Er40 Chuck will include a wrench(£10)
Jacobs tapers of unknown size/quality, a shell mill arbor and one soft arbor to make anything out of, £15 the lot including postage.

https://lh3.googleusercontent.com/-xsvXXhgw7kI/VWoQH7wD-kI/AAAAAAAAIWI/nrQkiDrOum4/s640-Ic42/DSC_0518.JPG

Paypal, cash on collection or bank transfer accepted.

Drop me a PM or email through the forum.

Regards

George

Chaz
05-02-2016, 09:17 AM
Dang, just bought two probes from Arnie, were delivered after what felt to be years. Cost me some import tax too.

Oh well.

komatias
07-02-2016, 01:00 PM
Collets and boring head are now sold.

komatias
07-02-2016, 03:51 PM
All bits now spoken for, pending payment.