spluppit
13-03-2016, 07:09 PM
Good evening guys,
Can any of you suggest a supplier of decent quality engraving bits. I'm looking for a 90 deg (included angle) cutter with a land on the tip of about 8thou /.2mm min or bigger. This is to cut a 90 deg v 2 mm deep in some half hard brass sheet to form folds. In an ideal world the supplier will have the ability to mod the cutter for the land, but i can do it if needs be.
I have looked about but google seems to insist on showing me everything in the states despite a uk search........ brilliant! It seems a mine filed of a lot of cheap junk, so suppliers you have used and know to supply decent quality cutters hss or carbide would be a bonus.
Many thanks.
Can any of you suggest a supplier of decent quality engraving bits. I'm looking for a 90 deg (included angle) cutter with a land on the tip of about 8thou /.2mm min or bigger. This is to cut a 90 deg v 2 mm deep in some half hard brass sheet to form folds. In an ideal world the supplier will have the ability to mod the cutter for the land, but i can do it if needs be.
I have looked about but google seems to insist on showing me everything in the states despite a uk search........ brilliant! It seems a mine filed of a lot of cheap junk, so suppliers you have used and know to supply decent quality cutters hss or carbide would be a bonus.
Many thanks.