jackpat
13-05-2016, 11:18 AM
Hi All,
We have two bridgeport interact knee mills and i have just made the jump and bought a haas VMC.
Just wondering if anyone had any tips, tricks or advice for these machines? I have not programmed one before and havnt used a lot of G-coding either, so all that is to learn. Ive been looking through the haas programming work book and it seems easy enough, but it doesnt relate anything to the actual control panel.
Any other manuals around which would be helpful? Ive also looked through the operators manual and that doesnt have much in relating to programming.
I've not got the machine back here yet, just trying to get a headstart.
Thanks!
We have two bridgeport interact knee mills and i have just made the jump and bought a haas VMC.
Just wondering if anyone had any tips, tricks or advice for these machines? I have not programmed one before and havnt used a lot of G-coding either, so all that is to learn. Ive been looking through the haas programming work book and it seems easy enough, but it doesnt relate anything to the actual control panel.
Any other manuals around which would be helpful? Ive also looked through the operators manual and that doesnt have much in relating to programming.
I've not got the machine back here yet, just trying to get a headstart.
Thanks!