CNCDuDeZ USB-Parallel Interface Version 1.0 2006
Release Date 08/03/2006
http://www.cncdudez.com 
info@cncdudez.com

In this archive you will find two Gcode files:

USB-PARV1PCB.gc
This Gcode is for milling the PCB and PCB is 75mm * 75mm
Set Zero for X and Y Axis to bottom left of PCB.

USB-PAR1-DRILL.gc
This is the Drill file and will drill all holes, so initially use say
a 0.8mm drill and then drill out bif holes with 3mm in a bench drill for speed.

