- Tab Content
- JohnHaine's Activity
- About Me
- Video Library
-
Older Activity
-
3 Hours AgoJohnHaine replied to a thread Help diganosing fault with chinese Chinese CNC router in General DiscussionTwo possible causes occur to me. One is that there is an intermittent connection in the z direction wire, but you seem to have ruled that out. The...2 replies | 53 view(s)
-
3 Days AgoJohnHaine replied to a thread Wiring plan for upgrading my chinese cnc electrics enclosure, have I missed anything? in Gantry/Router Machines & BuildingMy estop is wired to remove power from the spindle drive and assert an estop condition to the controller - there should be an input on the AXBB to do...5 replies | 708 view(s)
-
6 Days AgoJohnHaine replied to a thread Wiring plan for upgrading my chinese cnc electrics enclosure, have I missed anything? in Gantry/Router Machines & BuildingOn my lathe the e-stop turns off the drive and raises an E-stop condition on the controller. This halt execution but the drives remain energised and...5 replies | 708 view(s)
-
6 Days AgoJohnHaine replied to a thread Wiring plan for upgrading my chinese cnc electrics enclosure, have I missed anything? in Gantry/Router Machines & BuildingWhat's the reason for the stop/start button? Is it actually the E-stop? Normally it's useful to keep the stepper drives powered up even in an...5 replies | 708 view(s)
-
6 Days Agohttps://www.amazon.co.uk/Breakout-Controller-Control-Engraving-15-32VDC/dp/B084GPP44J/ref=sr_1_5?crid=1893MVWCXEGBZ&dib=eyJ2IjoiMSJ9.Lvwp1QoEu02_DVMHD...2 replies | 735 view(s)
-
2 Weeks AgoI understand that kitchen fitters use a laser scanner device to digitise the rooms where for example new worktops and units are to be fitted, and...2 replies | 1504 view(s)
-
4 Weeks AgoNovamill switches, on my mill anyway, are standard microswitches. Maybe there's a wire dropped off the z switch? If you are seeing the lights...29 replies | 27559 view(s)
About JohnHaine
Basic Information
About JohnHaine
- City:
- Cambridge, UK
- Country:
- United Kingdom
Statistics
Total Posts
- Total Posts
- 360
- Posts Per Day
- 0.08
- Last Post
- Help diganosing fault with chinese Chinese CNC router 3 Hours Ago
Total Thanks
- Total Thanks
- 1
General Information
- Last Activity
- 2 Hours Ago
- Join Date
- 24-09-2012
Help diganosing fault with chinese...