John says fat fingers, Jazz says Ugly !
Ok Boyan thrown some motors on controller and CANNOT make it Slave the motors together. changed all settings and still no Joy.
The A/B selection makes no difference. Setting A pulse to from Pulse/Deg to Pulse/Circ just makes the A motor ONLY spin continuesly with no control over it. Pulse Degree does exactly that moves in Degree increments per pulse.
I'm also not impressed with the Crap Terminal connectors on back what load of rubbish. Tiny holes and half of them won't clamp properly. I see loads of potential for trouble with lose or fallen out wires with these things.!!
DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
JAZZCNC
I'm also not impressed with the Crap Terminal connectors on back what load of rubbish. Tiny holes and half of them won't clamp properly. I see loads of potential for trouble with lose or fallen out wires with these things.!!
Clumsy fat fingered bastard.
Re: DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
John S
Clumsy fat fingered bastard.
Yes but I can lose weight but you'll always be Ugly Old Git.:chuncky:
Re: DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
JAZZCNC
Yes but I can lose weight :
About the same time Mach 4 is reliable, so I have no worries and me favourite Rocket Scientist seems quite happy :-)
Re: DDSCV1.1 3 and 4 axis offline motion controller
http://www.mycncuk.com/images/misc/quote_icon.png Originally Posted by John S http://www.mycncuk.com/images/button...post-right.png
Clumsy fat fingered bastard.
Yes but I can lose weight but you'll always be Ugly Old Git.:chuncky:
About the same time Mach 4 is reliable, so I have no worries and me favourite Rocket Scientist seems quite happy :-)
John S -
Go on John - swing yer 'andbag at 'im.
Re: DDSCV1.1 3 and 4 axis offline motion controller
See Phantom Post deleter strikes again.!! . . . . . Surely were all adults capable of seeing it's Mates having laugh at each others expense and no one elses.? . . . Cmon stop this needless censorship.
Re: DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
JAZZCNC
See Phantom Post deleter strikes again.!! . . . . . Surely were all adults capable of seeing it's Mates having laugh at each others expense and no one elses.? . . . Cmon stop this needless censorship.
And just when I thought it was safe to post things without people getting annoyed by moderation yet again.
I think my latest retro thread might be getting continued elsewhere.
Re: DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
JAZZCNC
See Phantom Post deleter strikes again.!! . . . . . Surely were all adults capable of seeing it's Mates having laugh at each others expense and no one elses.? . . . Cmon stop this needless censorship.
Knowing what you and John are like I saw the posts and smiled. ;-)
- Nick
Re: DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
magicniner
Knowing what you and John are like I saw the posts and smiled. ;-)
- Nick
I wasn't quick enough to see the posts, but I did get the emails with the posts' content.
Can't beat a bit good banter ;-)
I wonder if PMs are still being "monitored" as well...
Re: DDSCV1.1 3 and 4 axis offline motion controller
Quote:
Originally Posted by
m_c
I wasn't quick enough to see the posts, but I did get the emails with the posts' content.
Can't beat a bit good banter ;-)
I wonder if PMs are still being "monitored" as well...
Send me one saying I'm a clueless wakner and see if it gets pulled :P
