Kress 1050 FME-1 Parts

Hey guys,
I bought a Used CNC with a Kress 1050 FME-1 ROuter / Spindle.
Unfortunately i forgot to check all the bits where there.

It turns out the:
1. Nut
2. Collet
3. Lock power cord

Are all missing, Does anyone know where i can get some from or purchase alternatives, i have noticed the official ones are VERY expensive.

£45 for a cable
£25 for the nut
£15 for the collet.

Thanks in advance

I use them
http://cnc-plus.de/en/Collets---Clam...325d0e94428a23

Quote:

---

Originally Posted by CrazeUK

Hey guys,
I bought a Used CNC with a Kress 1050 FME-1 ROuter / Spindle.
Unfortunately i forgot to check all the bits where there.

It turns out the:
1. Nut
2. Collet
3. Lock power cord

Are all missing, Does anyone know where i can get some from or purchase alternatives, i have noticed the official ones are VERY expensive.

£45 for a cable
£25 for the nut
£15 for the collet.

Thanks in advance

---

Hi Craze

This chaps got all you need

http://www.bk-faserverbundtechnik.at...hp?cPath=13_51
http://www.bk-faserverbundtechnik.at...roducts_id=144
http://www.bk-faserverbundtechnik.at...roducts_id=285
http://www.bk-faserverbundtechnik.at...roducts_id=141
http://www.bk-faserverbundtechnik.at...roducts_id=150

the chap that runs the firm is very nice and prices are reasonable.
Cheers

Andrew

Multiple thread...

Here are some answers as well:

http://www.mycncuk.com/threads/10597...50-FME-1-Parts

Quote:

---

Originally Posted by A_Camera

Multiple thread...

Here are some answers as well:

http://www.mycncuk.com/threads/10597...50-FME-1-Parts

---

Hey. Thanks. Ya. I put one in a normal discussion thread, guess more to find out if there was alternatives, then realised I should have put a wanted ad too.

Sent from my SM-N930F using Tapatalk

Hey All.
Just an update. I now have a 6mm collet, a nut, and the cable. All that i need for the moment while i play.

I definitely plan on switching to a spindle sooner rather than later.

Thanks for everyones help :D