Printable View
I saw the lack of decent draw slide builds on you tube prompted me to make one better than whats currently on offer on you tube so here it is... unfinished of course !!!
cutting area should be 260mm x 350mm once finished
Attachment 20659Attachment 20660Attachment 20652Attachment 20654Attachment 20655Attachment 20661Attachment 20662Attachment 20663Attachment 20658Attachment 20657
ROTATING IMAGES
@steel: "Again pics are rotating somehow when i upload them anyone got a fix for that ?"
My way may not be the easiest way, but to fix this from the laptop I use an excellent and free product called IRFANVIEW http://www.irfanview.com/ and use function Image>Rotate Right (Clockwise) and then save the modified image, as I've found that the Windows Explorer function Rotate Clockwise/Counter-Clockwise is not honoured across different software apps.
Thanks Andy managed to rotate them in preview on the mac strange though as i rotated them 360 deg and there the right way up this time. !!
Well thats day of your life you'll never get back.!!!
Attachment 20792Attachment 20793Attachment 20794
Just a few photos of the z axis, shafts are 12 from some old rear shocks from a car, bushes are nylon diy held down with u bolts
Just a few more photos of the z axis, i will fit the lead screw tomorrow if all goes well.
Attachment 20833Attachment 20834Attachment 20835
finished off the z axis today, i finally gave up on having supported bearings on the lead screw and mounted it directly to the motor as ill only be using this machine for wood/plastics it wont be a problem
https://youtu.be/cj665WQhmYU
So today I made some progress...
I mounted x axis to the base
I updated z axis face plate to alloy insted of ply
I decided I didn't want the y axis motor sticking out the side so
I mounted it inboard
Im using my cheap ebay router
overall Dimensions are as follows...
Length of base 550mm
Width of base 500mm
Height overall 800mm
cutting area...
X 400mm
Y 260mm
Z 90mm
Attachment 20902Attachment 20903Attachment 20904Attachment 20894Attachment 20895Attachment 20896Attachment 20897Attachment 20898Attachment 20899Attachment 20900Attachment 20901
Sorry to sound negative, but you will kill that Z stepper very fast if you start using the machine. The screw seems to be hanging on the motor axis, which is a VERY bad idea, since the motor and the motor bearings are not designed for that heavy job. Same on all the other axes as well, but the Z is probably the most critical, and at least one end of the screw must be fixed. I also don't understand why use drawer slides. Those have just too much play and are not fit for the purpose. But OK, if learning is the purpose then fine, but considering the time you must spend on this, I am sure that real parts are better investment than parts which later on must be replaced, especially considering that replacing and squaring will be very difficult since you have welded everything possible to weld.
Don't be sorry the world is full of negative people !!! the stepper bearings will cope no problem,I am using heavy duty draw slides as i wanted to build a machine that uses alternative components as much as i can
Can you do me a favor and start a thread on your machine that way you can remove your links from my post and place them on your own post
cheers Dave