Mans Pillar Drill... good start to cnc mill project?

Evening All

anybody want to save this from the scrap man?

needs a bit of imagination... but either a proper pillar drill... or a base for a cnc project?
Attachment 21851Attachment 21852Attachment 21853Attachment 21854Attachment 21855Attachment 21856Attachment 21857Attachment 21858

beds about 48" by 18", rises up and down

motor on the spindle, is 0.75hp 3 phase, but can be ran in delta at 240v with vfd

located nr Hinckley in Leicester, if its somebody off here and you promise not to rob it, you can borrow the trailer

its on ebay starting at scrap money (40 quid) but if any of you lot want it, its yours first come first serve