CNCDrive AXBB super deal?

Hi all,

What about this one:

http://cncdrive.com/AXBB.html

Looks like an awesome deal!

For a starters it has 400khz of pulse rate capable cpu.

+ 1 PP equivalent io available including BOB/Isolation.


+ it is expandable with 1 extra PP worth of io


For only €129.-

+ it has UCCNC included.

I would say most people can do all they need with this board?

Any thoughts?

Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

I've started looking at Stand Alone Controllers, it's the future! :D

Quote:

---

Originally Posted by magicniner

I've started looking at Stand Alone Controllers, it's the future! :D

---

Do you have tested any standalone controller? I use hass machines and uccnc for the routers but I want dedicated controllers for routers.
Uccnc work really well, but I want a nice panel controller...
I don't want build one from scratch and config everything, is a lot time consuming..

Enviado do meu Redmi Note 4 através do Tapatalk

Quote:

---

Originally Posted by lp_felix

Do you have tested any standalone controller? I use hass machines and uccnc for the routers but I want dedicated controllers for routers.
Uccnc work really well, but I want a nice panel controller...
I don't want build one from scratch and config everything, is a lot time consuming..

Enviado do meu Redmi Note 4 através do Tapatalk

---

Hi lp_felix,

Do you think something like a 10" tablet type screen combined with UCCNC would meet your needs? I saw somebody using a dualcore surface pro with UCCNC.(usb uc300 i think)


I do my design scketching in the house and have the pc in my garage running F360 too, sharing the designs by f360 cloud.
Normally i run the nc export files in the garage.
I installed UCCNC on there to control the router.

When small issues come up i can do touchup in the garage.

I am a hobby cnc user so i do not run series of the same parts.

Having a multifunctional pc near the router is for now a good solution for me.

Somehow i dont see how carrying the nc files to a standalon controlbox per usb- stick as future proof... They should do a wifi solution to read the files from a network share or something.

I have been looking for usb drive / wifi / nas combined devices to overcome this.
It could have made me decide to go for stand alone, but never found a good one.



Grtz. Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

Quote:

---

Originally Posted by driftspin

Hi all,
For only €129.-

+ it has UCCNC included.

I would say most people can do all they need with this board?

Any thoughts?

Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

---

Indeed, a fine looking board. I can't find any reference to anything other than UCCNC. Is this a proprietary interface for UCCNC or are there similar drivers for Mach as for the other UCx00 interfaces?

Quote:

---

Originally Posted by Doddy

Indeed, a fine looking board. I can't find any reference to anything other than UCCNC. Is this a proprietary interface for UCCNC or are there similar drivers for Mach as for the other UCx00 interfaces?

---

Hi Doddy,

I am not sure, but the manual does not mention mach.



I am looking into some stuff for a friend who wants to build a 3axis router +/- 1000x1500x200 mm with twin x-axis ballscrews.



He has no software yet, so this is a very good looking board / software to start.


Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

Hi, driftspin
Yes a touch display will help and a MPG controller and a few buttons, but with the same cost (add a pc windows licence uccnc board and licence, mouse keyboard...) I think it's possible get some "industrial controller" from China.
I have 3 machines with uccnc, working fine.
I just like to try an controller like I have in vmc's.. Nothing so fancy like haas controller or simenes, an LNC or something.. Lololol

Enviado do meu Redmi Note 4 através do Tapatalk

Quote:

---

Originally Posted by lp_felix

Do you have tested any standalone controller? I use hass machines and uccnc for the routers but I want dedicated controllers for routers.
Uccnc work really well, but I want a nice panel controller...
I don't want build one from scratch and config everything, is a lot time consuming..

---

Boyan has tested an offline controller in the following thread that you may find of interest:
http://www.mycncuk.com/threads/10187...256#post102256

It's a nice one, but I would like to try something like this
https://app.alibaba.com/dynamiclink?...areScene=buyer


I don't buy one yet because e can configure one machine with uccnc im 10 minutes, and a controller like this probably will take days.
The guys from uccnc should develop a physical front panel and make a new screen using the same philosophy of industrial controller.
I think I have found something like that a few weeks ago..

I think it's a business opportunity..

Enviado do meu Redmi Note 4 através do Tapatalk

Quote:

---

Originally Posted by Doddy

Indeed, a fine looking board. I can't find any reference to anything other than UCCNC. Is this a proprietary interface for UCCNC or are there similar drivers for Mach as for the other UCx00 interfaces?

---

I have their UC300 controllers (have one for USB and one for ETH) and they both support Mach3 as well. If this new one is going to have drivers for Mach 3 or not, I have no idea, but CNC Drive have a pretty good support forum where you can ask that.

In fact, I just had a quick look, and there is an answer already to the same question:

http://www.forum.cncdrive.com/viewtopic.php?f=22&t=1834

Otherwise everything is proprietary, as far as I know, there are no generic controllers, and also in my experience, UCCNC is better than Mach3.