Connection hub

I'm still labouring away on updating my Fehlmann P50CNC, This is quite a complex machine and I have a lot of control and power supply (5v and 24v) wires that need to be distubuted.

I need a hub to bring together the wiring into a convenient place in the cabinet. I really just need something that can be screwed down to the base plate (or mounted to a din rail) with some high quality screw terminals so I can bring wires in and then take them out to relay boards (the sort with 2.54mm pitch pins).

Searching through eBay I can only find breakout boards with output sockets which are of no use. If it comes to it I'mm make something, but I'm sure there must be something ready made out there - I'm just searching for the wrong thing.

Thanks, David

Here you go these sort of things will do the job.

https://www.ebay.co.uk/itm/Dual-Row-...FIR6mnOJHnbFiQ

https://www.ebay.co.uk/itm/600V-15A-....c100005.m1851

Thanks Jazz, but I have plenty of that sort of thing - far too brutal. What I need is something with these nice little screw terminals - https://ebay.us/MV6BaJ

The application is for control volatages of 5v and 24v at very low current. There seem to be plenty of Arduino related boards or boards with d-sub connectors but none that are just straight through.

Quote:

---

Originally Posted by Agathon

Thanks Jazz, but I have plenty of that sort of thing - far too brutal. What I need is something with these nice little screw terminals - https://ebay.us/MV6BaJ

The application is for control volatages of 5v and 24v at very low current. There seem to be plenty of Arduino related boards or boards with d-sub connectors but none that are just straight through.

---

Can't you just get a piece of Veroboard and solder your nice little screw terminals to it?

Quote:

---

Originally Posted by ngwagwa

Can't you just get a piece of Veroboard and solder your nice little screw terminals to it?

---

I think I'm going to have to - so busy at the moment though, I was hoping for a ready made solution!

I've sometimes found that I've spent more time on the web looking for a neat off-the-shelf solution than it would have taken me to make something myself - doh!

Quote:

---

Originally Posted by Voicecoil

I've sometimes found that I've spent more time on the web looking for a neat off-the-shelf solution than it would have taken me to make something myself - doh!

---

You're not wrong! I'll order the bits today.

Thanks for all the replies.

David

I was thinking along these lines:
https://www.amazon.co.uk/Her-Kindnes...CREEVH1Q82NRAZ

https://www.amazon.co.uk/Dinkle-Asse.../dp/B01KMW7MY2

Aye up!!
Hows this....
https://www.amazon.co.uk/Electronics.../dp/B07BHJ7LCG
Attachment 28164

Quote:

---

Originally Posted by dazp1976

Aye up!!
Hows this....
https://www.amazon.co.uk/Electronics.../dp/B07BHJ7LCG
Attachment 28164

---

Dazp1976

That is a good deal per connection.

Thanks for that!

Grtz Bert.

Verstuurd vanaf mijn SM-A505FN met Tapatalk