Hi,
Does anyone know of a UK supplier of decent 1 and/or 2mm diameter ballnose carbide cutters for aluminium with a flute length around 10mm?
Printable View
Hi,
Does anyone know of a UK supplier of decent 1 and/or 2mm diameter ballnose carbide cutters for aluminium with a flute length around 10mm?
I can only see their 1mm ballnose with a flute length of 2mm ?Quote:
Originally Posted by phill05
https://www.shop-apt.co.uk/ball-nose...d-carbide.html
1mm with a 10mm flute?, I'll like to watch a video of you cutting with those... without swearing!
https://www.shop-apt.co.uk/2-flute-l...ong-55hrc.html
Long neck - not full length flutes. Don't know if that helps?
I have tried those thanks but they tend to gum up when used on aluminium. I have found long neck but they are in the order of £25 each so was hoping to find some cheaper.Quote:
Originally Posted by Doddy
For your entertainment here is a video of a 2mm tool cutting.
https://www.youtube.com/watch?v=B1OT1GJVUSE
Try looking for router bits rather than milling cutters perhaps?
https://www.rennietool.co.uk/product...smart_campaign
I bought some of these (but flat end) for a job I never did, so I can't tell you how good they are in ali.
https://www.aliexpress.com/item/3296...14b32917ArcyeD
These are brilliant for Aluminium, I've used 1mm up to 16mm, use the cutting data for YG AluPower and good flood coolant and they really shift material and also give nice surface finish when used on finishing passes.
https://www.shop-apt.co.uk/3-flute-c...-uncoated.html