Cnc Router

Looking to sell my cnc router as i need to buy a house

All aluminium construction on a steel base and fully enclosed for dust reduction.
20mm hiwin rails on all axis
roughly 900*600*150 work area
2.2kw water cooled spindle with delta vfd
auto tool measuring
1610 ballscrews on all axis
will rapid at 10000mm/min reliably ant cut at 7500mm/min
it comes with a 4th axis, just needs the driver
powered by a uc300eth motion controller
will run mach or uccnc software currently running uccnc (its much better than mach)
4nm steppers 8 wires, wired bipolar parallel
it cuts wood, plastics, and soft metals eg brass and aluminium easily.
looking for around £3750 with the laptop that runs it or can do a deal without the laptop (msi gp62)

https://1drv.ms/u/s!AkI3bots4KH5zCdS...XMHRo?e=rVrdqP

pics and a video are in the link above

im based in cornwall so a bit out of the way.

any questions please ask or other photos etc.