Lang technick fixturing - unused - suprlus to requirement

Hello all,

Clearing out, for some new projects….

Going to put this on this on ebay but I thought that I would see if any of this is of use to any members. Items where bought for a project a while ago, that was then managed in a different way - so was never used (In box’s most still sealed). Any questions please ask, I can pack for shipping on a pallet or provide photos etc. if required...

If you go here: https://lang-technik.de/en and enter the part number (45800 for instance in the sarch you will get all the details on each item)

1 x 45800 Quick-Point 96 Ø 176x27mm

1 x 45742 Quick-Point 96,4-fold Plate 384x384x27mm, for 100mm T Slots

1 x 45160 Quick-Point Adaptor Plate, 150 x 126 x 27 mm

16 x 25570 Quick-Point 96, Clamping Studs, Ø 20mm (45570)

1 x 48255-125 Makro-Grip 125, jaw width 125mm, length 260 mm

1 x 48125-2522 Spare Jaws Makro-Grip 125,jaw width 125mm,without holding teeth

1 x 49125 Profilo 125 Base Jaws (To suit 48***)

1 x 48085-77 Makro-Grip 77, jaw width 77 mm, length 102 mm

1 x 48085-7722 Spare Jaws Makro-Grip 77, width 77 mm, for 48085-77, without holding teeth

1 x 49077 Profilo 77 Base Jaws (To suit 48***)

2 x 49258 Profilo 125, Add-On Jaws, steel

2 x 49778 Profilo 77, Add-On Jaws, steel

4 x 49779 Profilo 77, Add-On Jaws, aluminium

4 x Profilo 125, Add-On Jaws, aluminium

1 x 42010 Torque wrench kit for vices and quick points 30-100Nm

1 x 41032 Preci-Point Collet Chuck ER32, incl. cap screw

1 x 41032-03 Clamping Wrench for ER32 Preci-Point Collet Chuck

1 x 41052 Preci-Point Collet Chuck, ER50 incl. cap screw

1 x 41052-03 Clamping Wrench for ER50 Preci-Point Collet Chuck

1 x 45008-20 Quick-Point Cover Discs, Ø 20 mm (20 Pcs)

Cost New £8500+ ex VAT, asking as a lot £5500 +VAT (exc. shipping) but will consider offers....

Any questions please ask…