Onefinity Elite Foreman 4x4 with 2.2kw spindle, laser etc

https://www.ebay.co.uk/itm/227450868079

For sale is my Onefinity Elite Foreman 4ft x 4ft CNC machine.

Comes with all the additional extras you could want, very capable machine for the hobbyist or business owner.

- upgraded ''stiffy'' rails from factory +££
- 2.2kw spindle attachment with water cooling on loop, much better than using a router of course.
- JW 24kw Quad pro laser attachment, comes with spare module and lasering grid. (approx £800 all in)
- Extraction Setup with nighthawk 3d printed extraction and 75mm hoses (extractor itself not included) ££
- ER20 Collets so can have up to 1/2 inch shanks, have collets of all sizes from 1mm through to 12mm.
- 10 or so spare cutters to get started, upcut, downcut, compression bits 1/4 inch, V groove bits etc.
- Bit setter for setting up tools and zeroing your workpiece.
- comes with a very sturdy table with undertable storage ££
- has the onefinity ''ultimate spoilboard'' current installed, also will come with a setup that can cater to a vacuum table if the setup requires, however this would need new vacuum and piping to convert back.

all of this from the only UK supplier (TREND UK) would cost approximately £8500. probably missed some stuff off to be honest!

selling due to lack of use, needing the space and going over to a smaller setup eventually.