Linear rail and bearing

Hi

Before it goes on ebay is anyone interested......
I have a 1m (39.37 inches in old money) length of C25 (origionally from Eurobearings) rail and one linear recirculating bearing for sale. The bearing has hole centres (dia 7mm) 45 x 57mm, the "bed" of the bearing is 58x70. Very stiff, light use, no play (preloaded), very small amount of surface corrosion but none on bearing face. Smooth and very strong. Used to hold z axis (big servo, screw, Kress) no problems. Bearing has wipers and grease nipple.

for rail dims see:
http://www.euro-bearings.com/mgsrail.htm

All bolted with 17 bolts to a bit of Aluminium bar 3 inch by 3/4 by 1m which is tapped 2x M8 at each end for mounting? I can take this off if not wanted. Sensible offers? I suggest buyer collects as it's heavy. 9kg with Aluminium, about 4-5 without.

Tom

Attachment 2344Attachment 2345Attachment 2346http://www.mycncuk.com/forums/images/misc/pencil.png

Can anyone suggest what its worth?
Tom

Its Abba Rail by the look of it.
If it is its the rail would be BR25R-L1000-N and the bearing would be the BRH25A.
We sell the bearings for £42 and the rail would be £80.00
This is new and there is also VAt to include.
Second hand would be about 25% of this, but you really need two bearings per rail and would normally have two rails.

Hi Gary
Thanks. It was origionally source from Eurobearings, only ever had one carriage. That gives me a really good value though. Many thanks.

Tom

Consider it sold, many thanks.

Tom