1 Attachment(s)
Parts for my hobby from your hobby
Hi Guys (an gals)
I have a small part that consists of 4 parts, PTFE(Teflon) as 15mm x 40mm round, a PEEK support, a brass nozzle and a brass collar. Could anyone prototype this for me so that I can test it?
I have the parts in pro-eng already to go.
here are the bits I have too explain the job. Please note the nozzle hole of 0.2mm it could be 0.25 but not smaller than 0.2.
Best regards
Frederick
Re: Parts for my hobby from your hobby
Quote:
Originally Posted by
Phobia1
Hi Guys (an gals)
I have a small part that consists of 4 parts, PTFE(Teflon) as 15mm x 40mm round, a PEEK support, a brass nozzle and a brass collar. Could anyone prototype this for me so that I can test it?
I have the parts in pro-eng already to go.
here are the bits I have too explain the job. Please note the nozzle hole of 0.2mm it could be 0.25 but not smaller than 0.2.
Best regards
Frederick
You will have a PM in a mo buddy
