Printable View
Hi all,
Here is for sell my Boxford 125TCL CNC lathe. All electronic replace with modern control (Gueko Drives)
RPM controlled via PWM.
comes with QCTP + 4 holders
Looking for £500.00 or could exchange / part exchange for an Orac / easyturn (see my post in WANTED section)
Ta,
Laurent
HI Laurent is the lathe still with you.
Mark
Hi Mark,Quote:
Originally Posted by MAW
Yes, the lathe still with me... :-)
Laurent
Hi Laurent,Quote:
Originally Posted by rnr107
Only seen this today, is it still with you?
John
Hi John,Quote:
Originally Posted by Chirpy
Yes, still with me... :-)
Laurent
Hi Laurent,Quote:
Originally Posted by rnr107
Can you forward details of modifications, any pictures etc and use to which you have used the lathe.
Are you still looking for circa £500?
Many thanks
John
Hi John,
All mods are electronic.
I removed the original control panel, replaced all the original electronic (exept the spindle control board) with modern drivers.
Added a BOB to connect to a standard Parallel port of a PC.
I'll post pictures ASAP. No problem!.
£500 still fine...
Laurent
Here are some pictures of the machine:
Attachment 6181Attachment 6182Attachment 6183Attachment 6184
Here is the picture of a part made on the 125:
Attachment 6185
Do you want pictures of the electronic?
Laurent
interested in this, I don't supose you have any video of it working and what it would be like cutting aluminium?
Hi Craig,Quote:
Originally Posted by craigrobbo
It does cut alluminium no problem... Unfortunatly I do not own any video camera... :-(
But then again, I am sure if you do a UTube search on Boxford 125TCL you'll find something! It is a very popular little lathe...
Here is one:
http://www.youtube.com/watch?feature...&v=pgAdO5TLDN0
Laurent