Optimum voltage for M60STH88-3008DF steppers and 752 drivers?

Good day all.

As per the title, what is the optimum voltage for my M60STH88-3008DF steppers and 752 drivers?
I am still using one of the 42volt ex-BT eBay power supplies.
Thanks for your time.

Best Regards.

Working on the general 32xSqrt inductance rule then 57Vdc is the safe option but I know they will happly take more without shortening the motors life too much.
I nearly always run them at 65-68V mainly because that works out nice for 625Va 24x24 transformer and still keeps a safe margin on the drives 75V limit.

Quote:

---

Originally Posted by JAZZCNC

I nearly always run them at 65-68V mainly because that works out nice for 625Va 24x24 transformer and still keeps a safe margin on the drives 75V limit.

---

Same here...can get away with 25+25V transformer but no real need to push the limit.

What happened to all the other ansers ? Went into 2 pages earlier.?

Quote:

---

Originally Posted by John S

What happened to all the other ansers ? Went into 2 pages earlier.?

---

I didn't see 2 pages John.?

Quote:

---

Originally Posted by John S

What happened to all the other ansers ? Went into 2 pages earlier.?

---

Quote:

---

Originally Posted by JAZZCNC

I didn't see 2 pages John.?

---

Nor did I - investigation initiated.

Sorry lads, brain fart - wrong post.