Just came across this and thought it may be of use to people looking at machining their own ballscrews, it shows the 'standard' threads and bearing dia's. -
http://www.mycncuk.com/forums/photop...00mm_small.jpg
Printable View
Just came across this and thought it may be of use to people looking at machining their own ballscrews, it shows the 'standard' threads and bearing dia's. -
http://www.mycncuk.com/forums/photop...00mm_small.jpg
Not nicked it, just borrowed it.....
I will put it back when everyone has finished looking at it.:naughty:
Oi thats mine, thief, call the police.
These ones are better.
OK, its a fair cop...!!!!
Best have a look at the better drawings before they take me away.:sad:
Oi you motherFunkie !Quote:
Originally Posted by Gary
anyone have something similar for 12mm ballscrews?
No but I do have some 12mm ballsrews that I could measure for you...
Not tonight though as after too many pints the tolerances get wider...
Hi
Marchant dice have some dimensions at http://www.worldofcnc.com/images/Machining.pdf
although it appears that things have moved on the thread front in that the one I got from them had an m8 x 0.75 thread.
A finer than the m8x1.0 on the list which meant more expense buying a tap and die which I had to buy as the other ball screws did not have the ends machined.
Peter
Here you go.
http://www.slidesandballscrews.com/p...ages 63-64.pdf
Quote:
Originally Posted by m100
Thanks, much appreciated!