Printable View
Posting this here to see if there's any interest, as I currently have no use for it.
It's a complete ISO15 spindle, with 8 BT15-ER16 tool holders, and air cylinder for the release.
https://farm6.staticflickr.com/5690/...4263e494b6.jpg
https://farm1.staticflickr.com/590/2...f92a338178.jpg
https://farm1.staticflickr.com/645/2...71d0b07902.jpg
I'm open to offers.
Hello m_c,
This bit of kit you have here is interesting to me, in as much as I would like to undertand how such would be set up. It is not the tool for me mind. I am looking for an ATC that will take a 12.7mm / 1/2" collet then someone to build me a router. That said, I bet this will make someone a nice bit of kit. If you have anymore info I would like to have a read up on it just out of interest.
All the best
Suesi
I'm guessing it's this one?
https://www.kickstarter.com/projects...le/description
If so, what rated speed are the bearings you got in it? I may be interested...
Not sure if this helps you Jonathan, that kickstarter sure dose look like the right one though:Quote:
Originally Posted by Jonathan
"The spindle cartridges and spindle shaft kits are supplied with NTN P42 25deg sealed angular contact bearings and are available with optional ceramic bearings at an additional cost."
.Me
Yes, it's the kickstarter spindle, and I only went for the standard bearings, which are supposed to be rated for 15'000rpm.
If it had been delivered on time, I would of had a use for it, however at the moment it's just an expensive shelf decoration unless I happen to find a cheap donor machine.
Hi M-C,Quote:
Originally Posted by m_c
Just been reading your posts and I could be interested in this spindle. Can you give an idea of what your after for it?
Cheers
Ali Kat
As it stands, it cost me $1200 plus import tax/VAT.
I know I probably won't get anywhere near that, but I'm not going to let it go for nothing!
Feel free to PM me an offer.
Thanks for the info. I think on this occasion I will take note of the difference between 'need' and 'want'.
Oh I really NEED a Haas VF4 SS and even more I WANT UMC750 but ain't going to see either this side of never . . LolQuote:
Originally Posted by Jonathan
why stop at HAAS when you can 'need' a dmg mori or a mazak or a makino :hysterical:Quote:
Originally Posted by JAZZCNC