Printable View
Hi all, I'm going to attempt to make a cribbage board for a friend, I'm either going to laser it out of 10mm live edge acrylic or cnc route, the problem is I can't find any dimensions for the holes sizes spacing etc.
Can anybody help? or if you have a dxf file I would machine one for you in return :)
cheers
p
Hi, if you can't find one let me know and I will draw one up for you and output the dxf file. G.
Cheers, this is the one I'm looking for, I'm having nothing to do with the pegs lol.
Attachment 16709
Hi, You do need to know what diameter is required for the pegs, unless you just want the hole centres marking. A picture of the board with approximate dimensions would also be helpful. I think the engraved lines would be fine with laser, but I do think the holes will need cutting (routing). G.
Hi, yes I think hole centre markings will be just find, I have no idea of the size or spacings im afraid, I was going to router blind holes on the cnc then jig it up on the laser to engrave it.Quote:
Originally Posted by GEOFFREY
Any luck with that board ?
http://www.instructables.com/id/CNC-Cribbage-Board/
half way down- dxf file
Well done deannos. That saves drawing it up. That DXF opens perfectly, absolutely no cleaning up required.
Swamptart, please remember that it was drawn in imperial so will need scaling (x25.4) if you are working in metric. G.
What a gent! thanks so much, if you would like one made for free in acrylic pm me your details and it shall be done! again many thanks and I will inc a pic when done, have a great Christmas guys.