BUILD LOG: CNC DIY milling machine . I am considering sell it.

Hi.
I would like to sell my CNC DIY milling machine.

But how much could I get for it?

Working area : 410mm x 350mm
Spindle : Kress 800 FME (German)
Motors: 3x Nema 23 1.9Nm 3A 57BYGH627
Drivers: 3x DQ542MA
Motherboard: LPT SSK-MB2

-All axis drived by 1204 ballscrew with nuts.
-all axis supplied with end stops switches
- base of machine 8mm mild steel and blue painted (car paint)
- X Y Z carriges made from aluminium (X bridge 8mm aluminum, Y carriage 10mm alu, z carriage 8mm alu)
- X axis 20mm not supported rails
- Y Z 16mm rails with supports
- maximum volecity about 1800 mm/min
-outlets for oil and air (cooling mist system)
- little compressor made from fridge refrigerator, and fire extinguisher.
- perystalitc pump for oil mist sytem included
- T-bed

- all electronic in nice cabinet made from 3mm aluminium with bid 120mm fan.
- Sound absorbing box with 35mm triangle foam (overall box dimensions L 800 x W 800 x H 650)
- laptop Acer TravelMate 280 with LINUXCNC software.
- I can include CAMBAM software for gcode generating.

Machine fully working and ready to work.

EXamples made on this machine:
Attachment 18628 Attachment 18629 Attachment 18630 Attachment 18616 Attachment 18617 Attachment 18632
Attachment 18631

Photos of machne:
Attachment 18633 Attachment 18618 Attachment 18634 Attachment 18635 Attachment 18636 Attachment 18619 Attachment 18637 Attachment 18638 Attachment 18620 Attachment 18639 Attachment 18640 Attachment 18641 Attachment 18621 Attachment 18622 Attachment 18623 Attachment 18624 Attachment 18642 Attachment 18643 Attachment 18644 Attachment 18626

Compressor:

Attachment 18627
Perystaltic pump

http://www.mycncuk.com/attachment.ph...1&d=1465661268

https://www.youtube.com/watch?v=bIRhUdytZmc
https://www.youtube.com/watch?v=4C7wnDJUjdE