The trick is to get your balls in the right hole mate. . .:hopelessness:Quote:
Originally Posted by 2e0poz
Printable View
The trick is to get your balls in the right hole mate. . .:hopelessness:Quote:
Originally Posted by 2e0poz
Garden full of snow, baltic weather. But not in my workshop ;)
Attachment 7948
properly cosy.
Right, quick update then.
Ordered replacement ballnut from Chai, aswell as four ballscrew blocks... Im also now waiting on more bandsaw blades.
Attachment 7949
Attachment 7950
not quite sure where im going to put the Y stepper... should of perservered with drawings.. but too impatient.
seperately, i have been given literally 2 tons of metal off-cuts. Its mainly 4mm and 5mm plate but some 3mm. all funny sizes but cut with machinery so all square. I think its galvanised?
anyway ive got far too much, and it was free so If anybody here needs any, come collect it. (leicester) The photo doesnt do how much ive got justice my estate car was on its arches with three loads. There is loads.
Attachment 7951
I have been looking for some scrap metal to practice welding but I guess galv isn't ideal? Not sure? I begged some scrap from a local fabby but have nearly run out...if it's suitable for arc welding practice I'd gladly take some off your hands!!
Love the burner btw !
Machine looks good too. G
ssssshhhhhhh******tttttttttt
so.... you guys always talk about planning planning planning... well ive made a big mistake
Attachment 8062
the ballscrew nut housing, that are bought paid for and on their way from china... are 86mm wide
Attachment 8063
WHAT a sausage.... I dont have that much space!!!
what am I going to do?
this is compounded by the fact ive ordered 4 of them, 2 for the x, 1 for y and 1 for z
Z dont fit
and guess what
Attachment 8064
so, when you've finished laughing... and can think of some constructive ideas... let me know
Plucked up the courage to finish the Y though...
Attachment 8065
If you've got the ballnut mounts from Chai they'll look nothing like the diagram he's sent you. They'll just be a steel block which you may be able to thin down the 86mm to less than 60mm. I dont have access to mine from Chai at the moment to get exact measurements but would say its deffo possible.
You can probably just saw off the two flanges then drill and tap some holes in the bottom, then it'll be 52mm wide.
Here's some I made earlier...I've got one left if that's any use to you? I just copied the dimensions of the ones on eBay.
Attachment 8066
KingCreaky,
I would try and mod the ones you have, but failing that this is a link to the mounts that I mentioned to you on Sunday.
Ball nut mount for 1605, 1610 ballscrew, free shipping to any country! | eBay
Jim
so, after sitting about feeling sorry for myself.. Ive made atleast a temporary measure... not sure if its good enough for the stresses of milling ali... but will be good enough for now I hope.
fortunately ive got that old ballnut... the one I broke previously... useful...
so; heres the plan
Attachment 8123
cut the circle out with the band saw (roughly). so it will go in my three jaw lathe chuck.
Attachment 8124
bore the center out with lathe
Attachment 8125
then get cutting and tapping...
Attachment 8126
seems to work... (Jonathon... if you need any help with your 'engineering' give me a shout :yahoo: