This company lists the correct collets near the bottom of the page -
https://www.spline.nl/machines/icp.php#Collets
I don't know if they are still trading or have stock but it's worth asking - again, found using Google and varying search terms!
Printable View
This company lists the correct collets near the bottom of the page -
https://www.spline.nl/machines/icp.php#Collets
I don't know if they are still trading or have stock but it's worth asking - again, found using Google and varying search terms!
cheers found them waiting for reply for 2 weeks now but sk11 info is helpfull
You'll have noticed that they list different collets for the 500 to the 1050 and it's the 1050 that's common with Kress?
yes I wondered if the small kress was same, rapidly coming to think a ew11 china man spindle may be way forward, deciding which one, and finding a mount that matches with the 100mm T slots
Steve
If you know anyone who's handy with a lathe the could make you a nut and a collet or two.
Can you supply the sizes large and small end + length of the collet you want to match to the Kress I have a set of collets and nuts I could check.Quote:
Originally Posted by Steve-m
Or should I Google.
Phill
no I dont, just looking through flea bay now for a spindle that takes ew11 collets, trying to remember what the 3 phase converter ones are called
Steve
Ha HaQuote:
Originally Posted by phill05
I did see a dimensions drawing some where will Google and see if i can find again #
Steve
spent all evening looking through history and google cant find it againQuote:
Originally Posted by Steve-m