CNCDrive AXBB super deal?

Quote:

---

Originally Posted by A_Camera

I have their UC300 controllers (have one for USB and one for ETH) and they both support Mach3 as well. If this new one is going to have drivers for Mach 3 or not, I have no idea, but CNC Drive have a pretty good support forum where you can ask that.

In fact, I just had a quick look, and there is an answer already to the same question:

http://www.forum.cncdrive.com/viewtopic.php?f=22&t=1834

Otherwise everything is proprietary, as far as I know, there are no generic controllers, and also in my experience, UCCNC is better than Mach3.

---

Hi A_Camera,

Good find.

CNCdrive really supports their customers right.

Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

I've ordered one....its on its way! 😁

Quote:

---

Originally Posted by CharlieRam

I've ordered one....its on its way! 😁

---

Are you using this on a router with slaved axis? If the axis are slaved using 2 motors will it be able to do that with the independent homing to square the axis? Just asking!!!

Quote:

---

Originally Posted by lp_felix

It's a nice one, but I would like to try something like this
https://app.alibaba.com/dynamiclink?...areScene=buyer

I don't buy one yet because e can configure one machine with uccnc im 10 minutes, and a controller like this probably will take days.
The guys from uccnc should develop a physical front panel and make a new screen using the same philosophy of industrial controller.
I think I have found something like that a few weeks ago..

I think it's a business opportunity..

Enviado do meu Redmi Note 4 através do Tapatalk

---

Just... don’t.

Quote:

---

Originally Posted by Clive S

Are you using this on a router with slaved axis? If the axis are slaved using 2 motors will it be able to do that with the independent homing to square the axis? Just asking!!!

---

My machine doesn't have a slave axis, I was considering the uc400 but then I saw this controller with the software....its a no brainer for me to try it 😊 £160 shipped

Quote:

---

Originally Posted by CharlieRam

My machine doesn't have a slave axis, I was considering the uc400 but then I saw this controller with the software....its a no brainer for me to try it [emoji4] £160 shipped

---

Oh ok,

Keep me posted, really interested on your findings.

Grtz Bert.


Verstuurd vanaf mijn SM-A320FL met Tapatalk

Will do but I hope you're patient....I've been working on my machine for 4 years! :whistle:

Quote:

---

Originally Posted by Doddy

Indeed, a fine looking board. I can't find any reference to anything other than UCCNC. Is this a proprietary interface for UCCNC or are there similar drivers for Mach as for the other UCx00 interfaces?

---

In the meantime, during the night, they have released the driver for Mach3.

http://cncdrive.com/AXBB.html

I bought one to use as a test setup for my desk to be used when developing custom screens and macros. Still waiting on some other components, but it's a really nice package.