Good to see it. Even better if you can bring yourself to drill a few holes in the machine itself - that might keep the knob polishers at bay if you ever need to trade it in for something better.
Printable View
Good to see it. Even better if you can bring yourself to drill a few holes in the machine itself - that might keep the knob polishers at bay if you ever need to trade it in for something better.
Any conversion, it's important to understand what your goals are - for me, it's a lathe that fits a small nook in the shed, and still allows me to squeeze into the work area near the mill. Not, as you might say, polishing the knobs.Quote:
Originally Posted by Muzzer
I've got to the stage where I've more bits stripped off the machine, than what remains on the machine. A tipping point where I can start to sell off bits rather than wistfully think of future restoration. Bed, spindle and saddle is all that I have left of the machine, and a bag of bits that is getting close to paying off what I originally spent on the machine.
You should be dragged into the street flogged and whipped to within an inch of your life for such atrocities.!! . . . .Not for drilling holes but buying a Myford in the first place....:hysterical:Quote:
Originally Posted by Doddy
Are you going to take the piss out of me then . :dog:Quote:
Originally Posted by JAZZCNC
I'd take the piss out of you no matter what you had..:toot:Quote:
Originally Posted by Clive S
My current lathe is a Colchester Bantam, having discovered that the Boxford AUD was not up to a decent cut , and a decent Myford super seven had reached serious big bucks by that stage if you wanted a gearbox and a cross feed,
I find that the bantam is a BIG little lathe capable of some serious work and comes complete with all the bells and whistles .(but we digress)
I am not yet confident enough to hack my Bantam about , at least not until I have become confident with the CNC process.
Hence the reason for buying the TCL. As they say ,"any old bike is good to practice on"
So having arrived at the stage where you have persuaded me to chuck the Boxford boards away, yet we think we can retain the lenze spindle controls , I am trying to establish whether I need to keep he processor board . It looks to me as if the relays which call the Lenze controller to run FWD, REV, and the latching functions may be within the processor board . Or have I got this wrong??
I am also trying to get my head around the pin signals to the BOB in relation to the switching functions of the manual control board . Each button there seems to switch a control voltage to earth . Is this a parallel arrangement to the control voltages utilised by the CNC software so could both working options .
Oh heck! What do you do to people who buy Chinese mini-lathes? :concern:Quote:
Originally Posted by JAZZCNC
We don't talk about that.Quote:
Originally Posted by Kitwn
Unspeakable things too gruesome to mention on a civilized forum, all I say is it involves electricity and cylindrical anatomy.:joker:Quote:
Originally Posted by Kitwn
Ouch.
Is it forgivable if they are your nearest source of kit?