Wire Connection Diagrams

hi gary....?been to your site(zap)is thesy85th118-4208 motors I see a price of +£28 pounds is that correct?....bobin

It is a £28 adder.
The way the site works, is you have a base price, and in this case it is £43.16 and then you add the adder dependant on the motor you choose.
So in this case the price would be £71.42.

Gary

Quote:

---

Originally Posted by bobin

hi gary....?been to your sight(zap)is thesy85th118-4208 motors I see a price of +£28 pounds is that correct?....bobin

---

sorry for hogging your time but on the msd980 boards on direction you have a plus 5v and a minus?? what signals are needed for these....will the +5 and low single wire goto +5 ,,if so what goes to the neg-.....bobin

Quote:

---

Originally Posted by bobin

sorry for hogging your time but on the msd980 boards on direction you have a plus 5v and a minus?? what signals are needed for these....will the +5 and low single wire goto +5 ,,if so what goes to the neg-.....bobin

---

I have attached a wiring diagram, and i think this will help.
Normally your direction signal goes to the Dir+ and the Dir- goes to ground.

This might help a few people: Wiring Connection Diagrams | Lead Wire | Stepper Motors | Lin Engineering and this: http://reprap.org/wiki/Stepper_motor which goes a bit off the scope of wiring....