wall and floor fixing am I the only one ????????????

Quote:

---

Originally Posted by JAZZCNC

Looks like your worring about nothing there James.!!

---

Now it is fixed down, yes that's shown there's nothing to worry about.

Quote:

---

Originally Posted by JAZZCNC

On another note.!. . . Are you going to lift those spindle brackets further up the front plate, basicly so the collet just clears the bottom of plate so your not wasting clearence height.?

---

Don't see the point as the height of the bed is adjustable, and doing that would mean the Z-axis would generally operate further down, which is weaker unless you compensate by putting the bed higher but I suspect it is already at the limit? Also if the collet just clearly the Z-axis could get in the way/collide with a large 3D part when cutting low down.

Quote:

---

Originally Posted by Jonathan

Don't see the point as the height of the bed is adjustable, and doing that would mean the Z-axis would generally operate further down

---

Ah ah thought it was strange having all that Z axis travel and so little clearence didn't know the bed was adjustable, doesn't look it from the Vid. I should probably payed more attention to the rest of the thread!! . . . . ME BAD.:confused: . . In that case forget what I said.:rofl:

2007, and I thought my build took a long time :lol:

Very Funny

I broke my camera the other week and only have a Car Video camera (the one's of ebay for £20.00) and it's ok for the quick up load and plus I can't read Chinese to change the date settings.

I have a video camera but no cables to get it from video to computer (it's Hi8 I think) I have ordered a set of cables today from ebay

well I've screwed the Machine down now and just waiting to pick up some corner brackets from Jonathan on Saturday My software has arrived so I should get that running tonight

So I should be cutting by Sunday/Monday

James

James just sounds like excuses to me?? just get out there and cut something before we all burst for gods sake??? blowing air cuts nothing :tup:

Quote:

---

Originally Posted by 2e0poz

blowing air cuts nothing :tup:

---

So what are all the tools you attach to an air compressor for then [insert suitable smiley here]