Torch Height control

I think this may give more info

http://www.fozztexx.com/CNC/HY-TB3DV-M_3Axis_Driver.pdf

I have used all those inputs for e stop and limits. May have to forget about the limits and use those pins?

Quote:

---

Originally Posted by Bobp

I have used all those inputs for e stop and limits. May have to forget about the limits and use those pins?

---

I think there are inputs where the pendant plugs in, ill have a look see..

Thanks Rick

Quote:

---

Originally Posted by Bobp

I have used all those inputs for e stop and limits. May have to forget about the limits and use those pins?

---

nope I cant see any spares so either lose two limit inputs or look at the pendant input, after all you are joging the Z up and down with the THC arnt you?


Rick

Quote:

---

Originally Posted by Ricardoco

nope I cant see any spares so either lose two limit inputs or look at the pendant input, after all you are joging the Z up and down with the THC arnt you?


Rick

---

To be fair i struggled with inputs on my own machine so got another Parallel card from ebay and the cheapest Breakout board i could and ran all my limits from that board only..

I will use the z limits inputs. I have been sickened with waist thus far so the thc is a must.

Thanks for your help Rick

You are very welcome, but hey keep me updated with your Plasma exploits as im building 1 myself next month and i would be very interested in how things turn out with your THC as i suspect i will get the same one you have..

I know this thread is pretty old but may I ask if you ever had success ? I want to use a TB6560 with Proma THC too and I am a bit confused with the manual.

Hi Nibbler
Did you manage to connect the THC from Proma easily and how was your experience ?
Looking to by one but I am confused between 2 brands.