I am interested in:
2 x 2mt 20mm supported rail + 4 bearing blocks
2 x 1.4mt supported rail + 4 bearing blocks
SF1610 ballscrew + nut
If you cannot sell the job lot let me know a price for these parts :)
Printable View
I am interested in:
2 x 2mt 20mm supported rail + 4 bearing blocks
2 x 1.4mt supported rail + 4 bearing blocks
SF1610 ballscrew + nut
If you cannot sell the job lot let me know a price for these parts :)
Hi Treemonkey..
Give me a few days to see if it goes as a package, if not, will happily sort you out a price..
Steve..
I'm interested in (in order of preference):
2200mm 25mm ballscrews, with matching nuts
70V PSU, and maybe the drivers.
16mm ballscrew with nut
I wouldn't want the bearing mounts for either ballscrew. Is 2200mm the length including end machining and is it just the standard end machining? Let me know if you don't sell it all together. If I get them I'll sell my two used 2094mm RM2510 screws and rotating ballnut assemblies, with new nuts.
What are you after if swapping? I might have some bits you could use...
Hi Jonathon..
Long time no speak/text/email etc..
Will measure them to be sure but they should (ballscrews) be 2.2mts + machined ends..
The PSU is the one I got from you..!
As mentioned, I would like a few days to see if anyone wants to take the lot as a package, but if not, I will sort out a price for you..
As for parts that I want, well, I plan on making a 300-400mm desktop machine so anything that is appropriate for that would be of interest.. The above stuff that I have is way to large scale to use for this project.. If I remember correctly, you have a workshop and are able to machine ally? Maybe we could do some sort of barter..?
Steve...
Hi Jonathon..
How strange.. My ballscrews are just about 2094mm + the machined end... Do we shop at the same stores..?
Steve...
I'd forgotten about that...Quote:
Originally Posted by fasteddy
That's a shame - I'd only gain a small amount by the time I've altered the end machining to have a thread on both ends, so it's probably not worth it for me. My current screws are 2094mm including end machining and they were from linearmotionbearings2008 on eBay.Quote:
Originally Posted by fasteddy
Possibly, I'll wait and see...Quote:
Originally Posted by fasteddy