Well nobody can say you are not a trier and hope that your kids are still excited with it:welcoming:
Printable View
Well nobody can say you are not a trier and hope that your kids are still excited with it:welcoming:
True dat! all made from scrap wood, it's flat and cuts straight.Quote:
Originally Posted by Clive S
just waiting for my replacement spindle.
gotta change gantry then if i'm happy i'll make a non scrap version.
Good that you're still going with it, your gantry looks well out of square in pic 2!!Quote:
Originally Posted by CNCKitMan
yeah its not mounted right. but need to make a better one anyways.
WASSON! OK so i've stalled HARd! on the re-build of my sheet cutter CNC with aluminium frame.
Whilst we are waiting for that i built 2 small 450mm x 450mm cutting area machines using belt drives.
One's at my mates being abused so no pics there but here's the other one (waiting on the post for parts)
photos to follow
Attachment 22776
This still has to have the Z-Axis on it but parts not here yet.
starting to look really good mate
Why thanks bro, from the Frankenstein beginnings to my little neat one, it's been loads of fun.
When you see my sheet cutter you'll see the neatness hasn't made it that far.
I had a quick browse of your build log. looks like your making head room.
BTW i know Nout just like you, however it seems it's not as hard they say.
Cheers, yes there is a lot of foreign terminology which is really hard to understand, but im slowly getting there just trying to get my setup finished. Really is a lot of fun though and learning so much every time a spend a few hours on my cheapo machine
Yeah, I felt the same. I'm not one for terminology. but sure is fun!
I admire your persistence but the fact you've moved to an aluminium frame was something I knew you would from the first post I read of yours. MDF/wood has just too much flex and also aluminium 10 years later is still aluminium MDF could easily be a mush.
I started my build very much like you (except that I was always going to have aluminium frame) but as I got to the end you start to realise there is a reason everyone tells you to get Hiwin's style rails and ballscrews because they work and they work well.
Cheap (Sub £1000) and decent router are not words that go together.
ROFL, I love you man. But me thinks you got me wrong.Quote:
Originally Posted by Desertboy
The aluminium frame in the photo is 1 of two of my baby CNC's
I still use my large wooden one and am making a aluminium one just because i can.
My wooden machine is Ply and Timber i used MDF to prototype parts (cheap stuff).
SO far cuts Hard and soft wood, perspex and slate.
Think That Qualifies as Decent?
I was going to use a chain drive but could find the parts i wanted so ended up ball n screw.
as for the rails My lovely door runners have held out and work like a cool summer breeze.
Router/Trimmer £40
Rails n Wheels £70 ish 120cm
Screws n Bits x3 £40 ish 100cm
Stepper Motors x4 £100
Drivers x4 £30
Controller £20
£300 as wood was all scrap i had that didn't cost me anything.
I Think that qualifies as cheap?
So my Cheap CNC Router is Decent ! lol look all three words in yet another sentence.
Of course depends on what qualifies as "precision" and "repeatability" for you. What you have done so far is in the 1-2mm region at best. if that suits you, then great. Most people trying to make a machine aim at least 0.1mm, the good builds aim at 0.05mm, exceptional builds can achieve 0.01 mm.
PS. I am talking "all over" not "absolute". I don't think possible to achieve absolute precision better than 0.05mm. Where "all over" means when you measure a machined element and "absolute" meaning at each point in the working area.
All jokes aside.
Yes over the years all metal will out last wood.
and i like ball screws over belts n stuff.
i'm just not on the page that you have to use this or that type of this or that.
Hey Bro,
My first big cutter (as i call it) She's made with no love, not much care and she's gonna die due to it.
Hence while shes working i'd thought i'll make another.
Shes pretty accurate as i'm always stopping and restarting my cuts (repeating ) due to something i forgot to add or take out.
Example would be this piece of old roofing tile, as they are not flat or even i had to repeat parts until they were closer to being the same depth.
Attachment 22777