Thanks Dean, I will do that!Quote:
Originally Posted by JAZZCNC
Printable View
Thanks Dean, I will do that!Quote:
Originally Posted by JAZZCNC
I start cutting and drilling parts from 20mm mdf to see if they fit right, after that I am going to use the mdf parts and my router table to shape the 20mm aluminium.
Attachment 24205
Attachment 24206
Attachment 24207
Nice! For some parts I wish i made a trialpiece first.. smart! ;)
Skickat från min SM-G955F via Tapatalk
It is time consuming but stress relief!Quote:
Originally Posted by Nr1madman
I use the clear plexiglass to make the holes,this method is fast and accurate,no measurements to take and nothing can go wrong this way,you see thru the plexiglass where you must drill and just drill,freehand.
The you put the Plexi on the mdf or aluminum plate ,put both on the drill press and make your drills nice and square!
Small update.
First of all I want to say that I am glad for two things untill now, first off all that I start to cut the plates from mdf and not direct on the 20mm aluminium plates.:D
And the second one is that I have those thick aluminium beams!
Warning, cover your eyes this build has nothing to do with what other guys post here :-P
Attachment 24307
Attachment 24308
Attachment 24309
Attachment 24310
Attachment 24311
I am about to order proximity switches and mechanical switches also,any recommendations ?
NPN or PNP and what about the voltages those switches,the proximity works,I find a big difference in working current...:disturbed:
NPN = normally closed. Basic Amazon ones work fine for general homing / limits (around £7 each)Quote:
Originally Posted by Nickhofen
Thanks for the reply!Quote:
Originally Posted by Chaz
Do I have to use mechanical switches also,I am a little bit confused.:-(
Nope, either or.Quote:
Originally Posted by Nickhofen
Mount the stepper motor on the Z axis,slowly growing...
Attachment 24410