Here we go again . . . MK4

Episode 17 - time to find out if the epoxy worked and how flat it is . . .

https://youtu.be/ebc7tiAAEZ8

I am prepared this time!:joyous:
Attachment 24490

Haha ! Nice one.:eagerness:

Quote:

---

Originally Posted by routercnc

Haha ! Nice one.:eagerness:

---

The timing was amazing, I was preparing this pop corn for the kids when I saw at my email that there is an update to your thread,imagine what happened next!haha!!!

Edit:I didn't ate all the pop corn, just took the nominal taxes!:tyrannosaurus:

Episode 18. More metrology measurements and flatness checks . . . . then a bit more building to finish the bed.
https://youtu.be/0X1BItweoSY

Nice! You are a true inspiration :)

Skickat från min SM-G955F via Tapatalk

Quote:

---

Originally Posted by Nr1madman

Nice! You are a true inspiration :)

Skickat från min SM-G955F via Tapatalk

---

Thank you !

Awesome looking build!

Is that a piece of granite worktop you are using to measure flatness from?

Quote:

---

Originally Posted by diycnc

Awesome looking build!

Is that a piece of granite worktop you are using to measure flatness from?

---

It’s a marble plate from our old fire surround. I checked it against other ground surfaces and it is pretty flat at least down to 0.05 mm. Also a ground block placed on it starts to wring together like gauge blocks so it must be close to flat.
Obviously nothing like a grade A plate or AA plate but it was free.

I keep looking at the proper granite blocks for metrology but they are pricey . . . One day maybe

Episode 19 is ready. This time we are mounting the gantry and getting it moving.

https://youtu.be/BRpSN7UU1cs