yes limited depth of cut to 1.8mm, was 0.8mm so it flat bottoms larger area's. That adden 3 minutes to it according to VCarve at 1min:46
Simulated it in Mach and got 2 hours 33.
Printable View
yes limited depth of cut to 1.8mm, was 0.8mm so it flat bottoms larger area's. That adden 3 minutes to it according to VCarve at 1min:46
Simulated it in Mach and got 2 hours 33.
Thanks again JAZZ. Need to have a look for some of them now.
Ian
Just thinking about the spot drill. I have a few chipped single flute 6mm mills. I wonder how one of them would do reground to 90Deg?
Ian
Just make sure whatever you use is ground to a sharp point. Some spot drills still have a web so you need to be careful.
I tend to regrind my 6mm single flute cutters back into the same cutter. Something useful to do whilst the router is running.
Ha ha looks like my build log got high-jacked only a couple of days in!! Looks amazing though. Thanks for the further info Jazz and hope your eyes are ok. I will try to get images of progress up in a few days...
Ye full of pirates and bandit's this place John S being Captain black beard . . " Argh argh yeh bastards who's swipped mi Hobnobs.!!"
Anyway don't complain too much because when you do have it cutting and wanting something to impress the Mrs you wont have to try remembering which post ya saw that Aztec calendar. . .Lol