Re: Are there any disadvantages to using Mesa ethernet boards over using a PCI board?
Quote:
Originally Posted by
Agathon
Rummaging through my extensive collection of junk I found this. 18v 2.3A rather than 24v - any good?
Attachment 27121
18V can be a bit unusual to interface to - if you're using the discrete outputs. If you're happy that it's not a problem then fine; I've used 12V - works for my illuminated buttons, most people will default to 24V.
Re: Are there any disadvantages to using Mesa ethernet boards over using a PCI board?
Re: Are there any disadvantages to using Mesa ethernet boards over using a PCI board?
Quote:
Originally Posted by
Agathon
Rummaging through my extensive collection of junk I found this. 18v 2.3A rather than 24v - any good?
Attachment 27121
I guess it should work - the Mesa manual says it will sense 5-32V on inputs and switch 5 through 28V on outputs. You'll lose a bit of noise immunity as you're only running at 75% of 24V, but with screened cables & good wiring I guess you'll probably be OK.
